Winnerwell Wood Burn Stainless Steel Hot Tub and Pool Water Heater

Winnerwell Wood Burn Stainless Steel Hot Tub and Pool Water Heater

Introducing the ultimate solution for luxurious warmth – the Winnerwell Stainless Steel Hot Tub and Pool Water Heater. For instance, Crafted for exceptional performance, this heater turns your water haven into a cozy oasis. Dive in and relish the soothing embrace of perfectly heated waters.

Key Features:

1. Premium Stainless Steel Build for Durability

2. Efficient Wood-Burning Design

3. Easy Installation and Operation

4. Transform Your Pool Time, Day or Night

5. Unleash Unprecedented Relaxation

A little theory:

● First, This water heater is a precision-built, high-efficiency water heater designed specifically for hot tubs. It circulates water using the principle “thermosiphon”-hot water rises and creates low pressure, which sucks water from below.
● After that, It eliminates the need for a circulating pump and electricity, making it possible to heat the water in a hot tub with the heater placed externally. A big advantage is that there will be more space in the tub, which in turn means a smaller model can be selected.
● After all, Every detail of the Winnerwell® hot tub water heater has been engineered for maximum efficiency, utilizing a sophisticated heat exchange design.The stainless steel body surrounding the firebox is actually a double-wall water-jacket, making the entire firebox a heat-transferring surface.

Specification:

Material: AISI304 Stainless Steel
Heater Body Dimension: D×L=600mm×800mm
Firebox Dimension: D×L=380mm×700mm
Pipe Diameter: 120mm

Rear Joint Pipe Dimension: OD: φ51mm; RC 1 1/2 taper thread inside.

Assembly Height (approx.): 3900mm
As a result, Net Weight (approx.): 35.8kg

The water circulation between the heater and the hot tub or pool can be done by gravity, in the case that the connecting hoses/pipes must not be longer than 50cm.

Moreover, If the distance is greater than 50cm, it is recommended to switch a pomp between, but this should not exceed a flow rate of 2000 liter/h, or can be regulated by means of a valve/ball valve. A pump with a low operating pressure (＜1 bar) is also recommended to minimize the risk of an increase pressure in the heater.